www.healthcraftproducts.com. Innovative Products for Independent Living.
HealthCraft's Product Line. How To Purchase HealthCraft's Products. Are you a Dealer? Click here. Are you a Therapist? Click here. HealthCraft Company Information. Contact Information. Demo Videos.
SnapToggle Bolts.

SuperPole System.

>SuperPole

>SuperPole Accessories

>SuperBar

>SuperTrapeze

>Safety Island

>Horizontal Rail System

Bath Safety Series.

>Dependa-Bar

>SerenaSeat

>P.T.Rail

>P.T.Rail Angled

>P.T.Rail Install Options

>Advantage Rail

>Stainless SuperPole

>Bath Board

>Easy Mount Grab Bars

>Wall Fasteners

Invisia Collection.

>Accent Ring

>Corner Shelf

>Soap Dish

>Towel Bar

>Wall Toilet Roll Holder

Bed Safety Series.

>Assista-Rail

>Assista-Cane

>Smart-Rail

>Hospital Smart-Rail

>ModRail

>e2 Wall Trapeze

>e2 Ceiling Trapeze

Health Care Facility Series.

>Revo Patient Turner

>SuperPole F.R.S.

>Quick Mount System
Snap Toggle.

HealthCraft grab bars are compatible with SNAPTOGGLE® bolts that mount directly behind drywall, tile or other surfaces to provide adequate reinforcement to the wall.

 

The SNAPTOGGLE® bolts gets their name from their speed and ease of use—they work in a SNAP!

 

Ideal for Heavy Loads in Hollow Walls, Ceilings & Floors.

 

SNAPTOGGLE® bolts pre-install without a bolt and can be installed with a screw gun. This allows one-person installations (instead of two), saving time and money. It's like having an extra pair of hands.

SNAPTOGGLE® Product Note (.pdf)

SNAPTOGGLE® Instructions (.pdf)
Download Acrobat
   

>Features & Benefits : SNAPTOGGLE® Bolts

 
Grab Bars.

Cost-effective

Turn a 2-person job into a 1-person job and get the job done faster. Save six minutes per anchor compared with old-fashioned methods.

 

SNAPTOGGLE® bolts always result in the lowest possible installation cost! Strongest toggle bolt in smallest hole

 

Convenient

Allow removal of bolt or fixture without anchor falling behind wall.

 

Most reliable

Will not damage or break through wall even when vibrated.

 

Easy to Use

Pre-install without bolt.

 

Accurate

Rugged pre-installation mechanism centers metal channel in small hole, before bolt insertion— and bolt won't sag.

 

Quick

Can be used with a screw gun—anchor won't spin in hole.

 
 
 
 
   

>Technical Specifications : SNAPTOGGLE® Bolts

 
Snap Toggle Install 1.
Snap Toggle Install 2.
Snap Toggle Install 3.
Snap Toggle Install 4.

Installation Instruction

(for demonstration purposes only - please refer to SNAPTOGGLE® bolt instructions for full instructions.

 

Step 1

Drill 1/2" (Ø13mm) hole. Hold metal channel flat alongside plastic straps and slide channel through hole. Minimum clearance behind wall: 1 7/8" (48mm).

 

 

 

 

Step 2

Hold ends of straps between thumb and forefinger and pull toward you until channel rests flush behind wall. Slide plastic cap along straps with other hand until flange of cap is flush with wall.

 

 

 

 

 

 

 

 

 

Step 3

Snap straps at wall by pushing side to side, snapping off straps level with flange of cap.

 

 

 

 

 

 

 

 

 

 

 

Step 4

Place item over flange. Insert bolt through item and tighten until flush against item, then stop.

 
   
 
   

>Model Numbers : SNAPTOGGLE® Bolts
       
 

MODEL

DESCRIPTION

HCP-STB

SNAPTOGGLE® Bolts

Holding strength of all TOGGLER® BRAND anchors varies directly with the strength of the wall material, the screw size, and the extent of the screw engagement.

 

Any recommended anchor is used at your own discretion and risk. Because of variations in screws and substrate materials beyond Mechanical Plastics Corp.'s control, it cannot guarantee the use of any anchor.

All designs and specifications subject to change without notice © 2007. Made in America.
 
 
   

>Downloads: SNAPTOGGLE® Bolts

 
Grab Bars.

SNAPTOGGLE® Product Note (.pdf)

SNAPTOGGLE® Instructions (.pdf)
Download Acrobat
 
   
 

© 2007 HealthCraft Products Inc. All rights reserved.